Use the proposed label height if the carrier fits and releases without disturbing the label on representative filled cans. If the carrier contacts or catches the upper label edge, evaluate a lower top edge and move any affected print with it. Use the exact can and carrier combination before ordering production rolls.

Filled can with a snap-on carrier and the upper edge of an adhesive label marked below it
Map contact between the carrier and the actual top edge through assembly and removal. Open at full size.

Observe the carrier while it is applied and removed

Put the same carrier on a plain filled can and on a can with the proposed label. Mark which part of the can the carrier contacts during assembly, then watch the removal motion the buyer expects a shopper or operator to use. PakTech documents a model-specific carrier and equipment that applies carriers to filled cans. Confirm the carrier reference and instructions for your package. PakTech’s standard can carrier example

Trial resultWhat to changeEvidence to keep
Carrier fits and the label stays clearKeep the label height within the approved can and carrier combinationInstalled carrier, normal removal and readable printed area.
The carrier catches or rubs the upper edgeSample a lower edge or a different approved landingContact map and a repeat of the complete pack and removal trial.
The carrier can obscure a needed fieldMove the field to the agreed visible areaReview the complete bundle and the released single can in the intended views.
Three steps verify the applied carrier, normal removal and the resulting label condition
Approve the complete bundle and the single can after removal. Open at full size.

Approve the decorated can in its complete pack

Include the normal range of placement and the actual sequence of filling, labeling and packing. Check that the decorated can seats as intended, and inspect the edge after removal and routine handling. If moving the artwork changes the amount of space for required information, give the revised layout to its owner before production.

A hypothetical canned tea brand might keep the same body wrap width but shorten the height to clear the carrier path. The change is justified only if the new can and bundle samples meet the agreed checks. Put the accepted carrier and label drawings together on the purchase brief.

Discuss the unresolved label requirement

Send the can drawing and representative filled cans, carrier model, proposed label height and top edge position, application sequence, desired visible area and quantities. Review beverage label options and prepare a label specification inquiry. The contact page opens an email draft and lists email or WhatsApp for attachments. Supply, proof options, testing, pricing and timing require project confirmation.